High-Definition AHD Vehicle-Mounted 5-Inch Side-View Blind Area Assistance System for Car Reversing

Description in Chinese

Product introduction:
The car digital rearview mirror system is a system composed of two displays and two cameras. It can provide us with more field of view than traditional side mirrors when the vehicle changes lanes or stops sideways. Even in rainy days or low light conditions, it can also provide a relatively clear field of view (because the lens may be contaminated by water, The display may not be clear in actual use). This product is a DIY auxiliary product and cannot replace the original car side rearview mirror

Precautions for product use:
1. The camera matched with this product is pasted on the body with double-sided tape. When pasting, the body should be dry and free of dust.
2. The monitor provides two bracket installation methods. Please select the corresponding bracket installation according to the actual use
3. There is no fixed requirement for the installation position of the camera. Generally, it should be higher than the horizontal position of the wheel. Before pasting, the appropriate position can be adjusted according to the actual display situation of the rhizosphere. The white plug of the camera is a mirror switch, which does not need to be pulled out by default. If you need to look at the perspective of the front wheels

Product parameters:
Display size: 5 inch TFT LCD IPS panel
Screen pixels: 800*480
Brightness: 600cd/m2
Power: DC12V-24V
Video signal support: CVBS and AHD dual mode
Source: AHD1/AHD2 switchable
Screen adjustment: AHD1, AHD2 mirror can be switched
OSD Language: English, Simplified Chinese, Traditional Chinese, Russian, Korean, Japanese
Camera chip: AHD
Camera pixel: 1280*720P
Camera angle: horizontal 87 °, vertical 62 °
Camera waterproof rating: IP67

English Description

Product introduction:

The automotive digital rearview mirror system is a system composed of two displays and two cameras. It can provide us with more vision than the traditional side rearview mirror when the vehicle changes lanes or stops in a side direction, even in rainy days or poor lighting conditions, It can also provide a relatively clear field of vision (due to the fact that the lens may be contaminated with water, the display may be unclear in actual use). Please note that this product is an auxiliary product of DIY and cannot replace the side rearview mirror of the original vehicle

Precautions for product use:

1. The camera matched with this product is pasted on the vehicle body with double-sided adhesive tape. When pasting, the vehicle body needs to be dry and free of dust

2. The monitor provides two bracket installation methods. Please select the corresponding bracket installation according to the actual usage

3. There is no fixed requirement for the installation position of the camera, which is generally higher than the horizontal position of the wheel Before pasting, you can adjust the appropriate position according to the actual display of the rhizosphere before pasting. The white plug of the camera is a mirror switch, which does not need to be pulled out by default. If you need to see the angle of view of the front wheel

Product parameters:

Monitor size: 5inch TFT LCDIPSpanel

Screen pixel:800*480

Brighness:600cd/m2

Power supply:DC12V-24V

Video signal support:CVBS and AHD dual model

Source:AHD1/AHD2 switchable

Picture adjustment:Mirror image switchable for AHD1,AHD2

OSD language:English, simplified Chinese, traditional Chinese, Russian, Korean, Japanese

Camera chips:AHD

Camera pixel:1280*720P

Camera angle: horizontal 87° and vertical 62°

Camera waterproof rate:IP67